pm四軸后處理Faunc寫入時顯示提示Error: can not interpolate anti-parallel vectors

ddss · 發表于 2012-12-19 15:42:07

馬上注冊，結交更多好友，享用更多功能，讓你輕松玩轉社區

您需要登錄才可以下載或查看，沒有賬號？立即注冊

×

提示Error: can not interpolate anti-parallel vectors. Check the CLDATA file
不知道是怎么回事，找不到問題難受死了。

gan20061202 · 發表于 2013-10-30 08:56:50

define block tape start
"%"
%D Day ; %M Month ; %Y Year ; %h Hour ; %m Minutes ; %s Seconds ; " )"
if ( DPversion < 1361 )
   error " MINIMUM DUCTPOST VERSION REQUIRED = 1361"
end if
VER DPversion ; OFN OptionFileName ; " )"
ID JobName
N ; G4 05 =C ; " P10000"
N ; G2 40 ; G3 17 ; G4 80 ; G6 49
N ; G5 91 ; G6 28 ; z coord 0
  end define
#357
  define block tool change first
TT ToolType ; " )"
TN ToolName ; " )"
if ( ToolType = "BALLNOSED" or ToolType = "ENDMILL" or ToolType = "DRILL" )
   TD ToolRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
else
   TD ToolRadius[ToolNum] ; TR TipRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
end if
THK Thickness ; " )"
NT ToolNum ; T ToolNum ; change tool
N ; G5 90 ;
set swa
  end define
#371
  define block tool change
if ( cycledwell = 0 )
   N ; G4 80 ; M2 9 ; M3 59
end if
if ( cycledwell > 0 )
   N ; G4 05 =C ; " P0"
end if
N ; G5 91 ; G6 28 ; z coord 0 =C
N ; G6 49 ; H  0
N ; G6 28 ; x coord  0 =C ; y coord 0 =C
TT ToolType ; " )"
TN ToolName ; " )"
if ( ToolType = "BALLNOSED" or ToolType = "ENDMILL" or ToolType = "DRILL" )
   TD ToolRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
else
   TD ToolRadius[ToolNum] ; TR TipRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
end if
THK Thickness ; " )"
NT ToolNum ; T ToolNum ; change tool（第二次換刀就沒有Ａ角度定位了）
N ; G5 90 ;
set swa
  end define
#394
  define block move from
  end define
#397
  define block cldat 1094
set swa
  end define
#401
  define block move rapid
if ( swa )
   "( ======== )"
   TPN ToolPathName ; " )"
#
   "( ToolPath Time" ;
   tpt ToolPathTime ;
   secs ( Word{tpt} % 60 ) ;
   mins ( Word{tpt} - Word{secs} / 60 % 60 ) ;
   hrs  ( Word{tpt} / 60 - Word{mins} / 60  ) ; act ( Word{act} + Word{tpt} ) ;
   %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
#
   if ( Word{act} > Word{tpt} )
      "( Accumulative Time " ;
      secs ( Word{act} % 60 ) ;
      mins ( Word{act} - Word{secs} / 60 % 60 ) ;
      hrs  ( Word{act} / 60 - Word{mins} / 60 ) ;
      %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
   end if
   "( ======== )"
   unset swa
end if
N ; G1 ; G2 ; G4 ; G5 ; G6 ; x coord ; y coord ; z coord ;
      elevation axis ; tool length ; spindle ; M1 ; M2
  end define
#427
  define block move linear
if ( swa )
   "( ======== )"
   TPN ToolPathName ; " )"
#
   "( ToolPath Time" ;
   tpt ToolPathTime ;
   secs ( Word{tpt} % 60 ) ;
   mins ( Word{tpt} - Word{secs} / 60 % 60 ) ;
   hrs  ( Word{tpt} / 60 - Word{mins} / 60  ) ; act ( Word{act} + Word{tpt} ) ;
   %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
#
   if ( Word{act} > Word{tpt} )
      "( Accumulative Time " ;
      secs ( Word{act} % 60 ) ;
      mins ( Word{act} - Word{secs} / 60 % 60 ) ;
      hrs  ( Word{act} / 60 - Word{mins} / 60 ) ;
      %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
   end if
   "( ======== )"
   unset swa
end if
N ; G1 ; G2 ; x coord ; y coord ; z coord ;
      elevation axis ; tool length ; spindle ; feedrate ; M1 ; M2
  end define
#453
  define block move circle
N ; G1 ; G2 ; G3 ; x coord ; y coord ; z coord ; radius =C ; feedrate
  end define
#457
  define block cycle start
if ( cycle = 2 or cycle = 3 or cycle = 5 )
   # DRILL
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; drill peck depth ;
      DW cycledwell ; feedrate
end if
if ( cycle = 6 )
   # Bore
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; Q1 300 =C ; feedrate
end if
if ( cycle = 1 and cycledwell > 0 )
   # G82 DRILL AND DWELL
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; DW cycledwell ; feedrate
end if
if ( cycle = 1 and cycledwell = 0)
   # G82 DRILL
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; feedrate
end if
if ( cycle = 4 )
   # TAP
   N ; M1 29 ; S ToolSpeed =C ; M2 3 =C
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; feedrate
end if
  end define
#482
  define block move cycle
N ; x coord ; y coord ; z coord ; feedrate
  end define
#486
  define block move tap
N ; x coord ; y coord ; z coord ; feedrate
  end define
#490
  define block cycle end
if ( cycledwell = 0 )
   N ; G4 80 ; M2 9 ; M3 59
end if
if ( cycledwell > 0 )
   N ; G4 05 =C ; " P0"
end if
  end define
#499
  define block tape end
N ; G5 91 ; G6 28 ; x coord 0 =C
N ; G6 28 ; y coord 0 =C
N ; M1 30

gan20061202 · 發表于 2013-10-30 08:54:50

define block tape start
"%"
%D Day ; %M Month ; %Y Year ; %h Hour ; %m Minutes ; %s Seconds ; " )"
if ( DPversion < 1361 )
   error " MINIMUM DUCTPOST VERSION REQUIRED = 1361"
end if
VER DPversion ; OFN OptionFileName ; " )"
ID JobName
N ; G4 05 =C ; " P10000"
N ; G2 40 ; G3 17 ; G4 80 ; G6 49
N ; G5 91 ; G6 28 ; z coord 0
  end define
#357
  define block tool change first
TT ToolType ; " )"
TN ToolName ; " )"
if ( ToolType = "BALLNOSED" or ToolType = "ENDMILL" or ToolType = "DRILL" )
   TD ToolRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
else
   TD ToolRadius[ToolNum] ; TR TipRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
end if
THK Thickness ; " )"
NT ToolNum ; T ToolNum ; change tool
N ; G5 90 ;
set swa
  end define
#371
  define block tool change
if ( cycledwell = 0 )
   N ; G4 80 ; M2 9 ; M3 59
end if
if ( cycledwell > 0 )
   N ; G4 05 =C ; " P0"
end if
N ; G5 91 ; G6 28 ; z coord 0 =C
N ; G6 49 ; H  0
N ; G6 28 ; x coord  0 =C ; y coord 0 =C
TT ToolType ; " )"
TN ToolName ; " )"
if ( ToolType = "BALLNOSED" or ToolType = "ENDMILL" or ToolType = "DRILL" )
   TD ToolRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
else
   TD ToolRadius[ToolNum] ; TR TipRadius[ToolNum] ; TLH ToolLength[ToolNum] ; " )"
end if
THK Thickness ; " )"
NT ToolNum ; T ToolNum ; change tool
N ; G5 90 ;
set swa
  end define
#394
  define block move from
  end define
#397
  define block cldat 1094
set swa
  end define
#401
  define block move rapid
if ( swa )
   "( ======== )"
   TPN ToolPathName ; " )"
#
   "( ToolPath Time" ;
   tpt ToolPathTime ;
   secs ( Word{tpt} % 60 ) ;
   mins ( Word{tpt} - Word{secs} / 60 % 60 ) ;
   hrs  ( Word{tpt} / 60 - Word{mins} / 60  ) ; act ( Word{act} + Word{tpt} ) ;
   %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
#
   if ( Word{act} > Word{tpt} )
      "( Accumulative Time " ;
      secs ( Word{act} % 60 ) ;
      mins ( Word{act} - Word{secs} / 60 % 60 ) ;
      hrs  ( Word{act} / 60 - Word{mins} / 60 ) ;
      %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
   end if
   "( ======== )"
   unset swa
end if
N ; G1 ; G2 ; G4 ; G5 ; G6 ; x coord ; y coord ; z coord ;
      elevation axis ; tool length ; spindle ; M1 ; M2
  end define
#427
  define block move linear
if ( swa )
   "( ======== )"
   TPN ToolPathName ; " )"
#
   "( ToolPath Time" ;
   tpt ToolPathTime ;
   secs ( Word{tpt} % 60 ) ;
   mins ( Word{tpt} - Word{secs} / 60 % 60 ) ;
   hrs  ( Word{tpt} / 60 - Word{mins} / 60  ) ; act ( Word{act} + Word{tpt} ) ;
   %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
#
   if ( Word{act} > Word{tpt} )
      "( Accumulative Time " ;
      secs ( Word{act} % 60 ) ;
      mins ( Word{act} - Word{secs} / 60 % 60 ) ;
      hrs  ( Word{act} / 60 - Word{mins} / 60 ) ;
      %h Word{hrs} ; %m Word{mins} ; %s Word{secs} ; " )"
   end if
   "( ======== )"
   unset swa
end if
N ; G1 ; G2 ; x coord ; y coord ; z coord ;
      elevation axis ; tool length ; spindle ; feedrate ; M1 ; M2
  end define
#453
  define block move circle
N ; G1 ; G2 ; G3 ; x coord ; y coord ; z coord ; radius =C ; feedrate
  end define
#457
  define block cycle start
if ( cycle = 2 or cycle = 3 or cycle = 5 )
   # DRILL
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; drill peck depth ;
      DW cycledwell ; feedrate
end if
if ( cycle = 6 )
   # Bore
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; Q1 300 =C ; feedrate
end if
if ( cycle = 1 and cycledwell > 0 )
   # G82 DRILL AND DWELL
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; DW cycledwell ; feedrate
end if
if ( cycle = 1 and cycledwell = 0)
   # G82 DRILL
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; feedrate
end if
if ( cycle = 4 )
   # TAP
   N ; M1 29 ; S ToolSpeed =C ; M2 3 =C
   N ; G4 ; G5 ; G6 ; drill hole depth ; clearplane ; feedrate
end if
  end define
#482
  define block move cycle
N ; x coord ; y coord ; z coord ; feedrate
  end define
#486
  define block move tap
N ; x coord ; y coord ; z coord ; feedrate
  end define
#490
  define block cycle end
if ( cycledwell = 0 )
   N ; G4 80 ; M2 9 ; M3 59
end if
if ( cycledwell > 0 )
   N ; G4 05 =C ; " P0"
end if
  end define
#499
  define block tape end
N ; G5 91 ; G6 28 ; x coord 0 =C
N ; G6 28 ; y coord 0 =C
N ; M1 30

gan20061202 · 發表于 2013-10-30 08:50:14

誰來幫一忙，在哪里設？

gan20061202 · 發表于 2013-10-30 08:49:31

想讓它有
Ｇ1　Ｘ10.　Ｙ20.　Ｚ30.　Ａ30.　Ｆ3500

gan20061202 · 發表于 2013-10-30 08:48:31

只有Ｔ3　Ｍ6
Ｇ1　Ｘ10.　Ｙ20.　Ｚ30.　Ｆ3500

gan20061202 · 發表于 2013-10-30 08:47:28

順上面題目延伸一下，ＦＡＮＵＣ四軸
換刀后，沒有輸出Ａ軸定位值，哪里
設置，

headwater · 發表于 2013-10-12 13:47:32

要好多錢的  不過還是謝謝樓主

ddss · 發表于 2012-12-20 09:39:11

已解決,謝謝各位

vinney777 · 發表于 2012-12-20 08:23:21

應該是旋轉軸替換錯誤

賬號		自動登錄	找回密碼
密碼			立即注冊

亚洲精品自拍偷拍_欧美八区_天堂中文资源在线_99热超碰在线_伊人亚洲精品_日本中文在线

[求助] pm四軸后處理Faunc寫入時顯示提示Error: can not interpolate anti-parallel vectors

馬上注冊，結交更多好友，享用更多功能，讓你輕松玩轉社區

站長推薦 /2